BEAD MILL FOR R&D
Functionality
In the DYNO®-MILL RESEARCH LAB, a screw conveyor feeds the low to medium-viscosity suspension into the grinding cylinder.
The patented DYNO®-ACCELERATOR accelerates the grinding beads, ensures high energy input and ensures efficient grinding of the particles – if necessary in the range of less than 100 nm.
- Feed hopper 250 ml or 500 ml
- Product inlet
- Sealing housing for lip seal or double mechanical seal
- Screw conveyor
- DYNO® ACCELERATOR in hardened chrome alloy or zirconium oxide
- Coolable grinding container with grinding cylinder made of silicon carbide or zirconium oxide
- Cooling water inlet
- Cooling water outlet
- Grinding bead separation by means of flat screen with gap widths for use of grinding beads from 0.05 to 1.0 mm
- Product outlet
Features
PRACTICAL AND EASY TO HANDLE
The uniqueness of the DYNO®-MILL RESEARCH LAB lies in its design:
The complete grinding region can be separated from the drive by loosening only three screws. The disassembled grinding region can then be dismantled very easily in a few simple steps.
This makes the cleaning process quick and easy. The separate grinding cylinder can be sterilized as a whole.
- Small product batches from 100 ml for processing in continuous pass and circulation mode
- Suitable for grinding beads of 0.05 to 1.0 mm diameter
- High energy input
- Particle fineness of less than 100 nanometres
- Suitable for low to medium-viscosity suspensions
- Ceramic version made of zirconium oxide/silicon carbide for metal-free processing
- Very fast dismantling of the grinding unit
- Easy cleaning of the grinding cylinder
- The complete separated grinding unit can be sterilized
- Patented grinding principle with DYNO®-ACCELERATOR
- Narrowest particle size distribution
- Easy to operate control concept
- Process data acquisition (optional)
- Low-noise operation with <65 dB(A)
Specifications overview
Grinding Chamber Volume ml | Minimum Batch Volume ml | Mill Drive kW | Agitator Shaft Speed rpm | Water Cooling Requirement l/h | Weight of Basic Machine kg | Dimensions L/W/H mm |
|---|---|---|---|---|---|---|
| 80 | 100 | 1.1 | 1500-6000 | 100-300 | ca. 25 | 620 x 250 x 430 |
Changes in design reserved. The performance data quoted is intended solely as a guide and depends on the product to be processed.
